|
|
|
Thruster brake is a device used to retard the speed of moving machinery and to stop it accurately to the desired position. |
| Read more about Thruster brake |
|
|
| |
|
|
|
| |
|
|
|
Lever Limit Switches are used for Heavy duty E.O.T. Cranes, Hoists to prevent over Travel of hoisting motion on power and control circuit up to 500 V and 40 Amps. |
| Read more about Lever Limit Switch |
|
|
| |
|
|
|
Disc Brakes are Very compact and modern in design.Foundation is not necessary as they are directly mounted on non-driving end shaft of the motor. It consist of Liner Plates (Brake Disc) with square hole ate the centre. |
|
|
| Magnetic Clutch |
|
Clutch is used to transmit the power only & Brake is used to stop machine only.Clutch will engage drive to machine and when brake is applied clutch will only disconnect drive from machine and brake will stop machine only. |
| Read more about Magnetic Clutch |
|
| |
|
|
Brakes are applied on brake drum. The shoes of the brakes are applied on brake drum in normal condition. When the motion is to be obtained the brake shoe are released and the brake drum is free to rotate. |
|
|
|
|
Geared couplings are used to connect two different shafts or offset shafts. Geared couplings are made of EN material to absorb shocks. Geared coupling consists of gear which transmit the motion smoothly by absorbing shocks |
|
|
| |
|
|
Electro Magnetic Brakes are used when a load must be stop rapidly to prevent it from rotaing. These brakes are used in Paper Mills, Drives of certain Textile Machines, Sugar Mill Machinery, Rubber Mixing Mills. |
|
|
|
|
A Grab Differential limit Switch is Driven by holding and closing winches used in
Auxiliary circuit for single level grabs control.It is used to stop or start the function of the
motor at required preset position, irrespective of the height of the grab. |
|
|
| |
